Rancilio Classe 8 User Manual download pdf (Page 23)

8.5. Machines with TSC automatic system

(Fig.7) (only Mod. DE)

8.5.1 Heating Milk or a Drink (TSC)

● Immerse the wand in the drink

● Press button 6.2 on the keypad (Fig.7)

● The display will show the temperature of the

drink

● Press button 6.2 again to stop heating at the de-

sired temperature.

● Wait for the machine to stop automatically at the

programmed temperature.

8.5.2. Preparing Frothed Milk (TSC)

● Immerse the wand in a container containing at

least 250 cc of milk (the sensor must be at least 3

cm below the water level).

To obtain best results, use refrigerated milk (≤ 5°C)

- (≤ 41°F)

● Press button 6.1 on the keypad (Fig.7)

● The display shows the temperature of the milk.

● Press button 6.1 again to stop the machine at the

desired temperature and emulsion level.

● Wait for the machine to stop automatically at the

set temperature and level of froth.

8.6 Programming functions

8.6.1 Programming Panel (Mod.DE)

Use the first coffee keyboard with keys having the

following functions (Fig.9):

1° Button Enter programming

Keeping pressed for 8 sec. you enter

programming, then you have:

(Fig.10)

1° Button “+” To move to a higher level in the

programming menus. Or to

increase the value

2°Button “-” To move to a lower level in the

programming menus. Or to

decrease the value

3° Button “enter” To enter the programming

menu. Or to confirm entries

4° Button “esc” To quit the menu

Or to quit programming mode.

5° Button Key off.

When the dose of hot water is being delivered electro-

nically, delivery can be interrupted by pressing the

button 5B.

When purified water is used, these beverages often

assume a darker colour.

Should the user prefer a lighter coloured drink, draw

fresh water from an ordinary tap and proceed with the

heating phase as described in point 8.3.

8.7 Programming (Mod.DE)

By keeping START/STOP key pressed and switching

the machine off and on again, you will enter pro-

gramming.

8.7.1 Barman programming (Fig.12)

By keeping key 1 of keyboard 1 pressed for 8 seconds

you will enter programming.

By pressing “+” and “-” keys the following sub-menus

will be browsed:

Programming with the following sub-menus:

- Clock

- Set date

- Set time

- Date/time format

- Set timer

- Stand by timer

- Sunday

8.7.2.Clock

Sub-menu to set date and time and mode (24 hours

or English 12 hours and date with dd/mm/yy or

mm/dd/yy)

8.7.3 Set timer

Menu to set automatic switching on/off of the machine

as follows:

- select automatic or manual switching on (to enable

function or not)

- set switching on time for every day of the week

- set working hours

To browse from one menu to another press “+” or “-”,

to enter a sub-menu or to confirm a variation press

“enter”, to exit press “esc”.

The value that can be modified with “+” or “-” keys

is flashing.

8.7.4 Timer-cut-out (Fig.13)

If the machine is turned off by the program, by pres-

sing key 4 of keybord 1 at least for 3-4 seconds it will

turn on again and remain on until the following pro-

grammed stop or by pressing the same key again.

If the machine is turned on by the program, by pres-

sing key 4 of keybord 1 at least for 3-4 seconds it will

turn off again and remain off until the following pro-

grammed stop or by pressing the same key again.

1 2 ... 18 19 20 21 22 23 24 25 26 27

Comments to this Manuals

No comments

Rancilio Classe 8 User Manual Page 23

Comments to this Manuals

Related products and manuals for Coffee makers Rancilio Classe 8